| |
|
///////////////////
CAUTION! ///////////////////
LIFTING A VEHICLE IS A DANGEROUS APPLICATION
|
1.
NEVER USE A DAMAGED LIFT
2.
NEVER LET A CUSTOMER OR UN-AUTHORIZED PERSONNEL INTO THE LIFT
AREA
3.
NEVER EXCEED THE LIFTS MAXIMUM CAPACITY
4.
NEVER OVERRIDE CONTROL BUTTONS OR VALVES
5.
NEVER TRY TO STOP A VEHICLE FROM FALLING (Get out of the way)
6.
NEVER GET UNDER A LIFT THAT IS NOT RESTING ON ITS SAFETY LATCHES
7.
NEVER REMOVE LARGE COMPONENTS WITHOUT THE AID OF JACK STANDS
8.
NEVER USE ANY HOMEMADE LIFTING ADAPTERS (wood blocks)
9.
NEVER USE A LIFT WITH SOMEONE UNDER THE LIFT OR IN THE VEHICLE
10.
NEVER LOOK AWAY WHEN OPERATING A LIFT |
|
| |
|
|
| |
Download Printable File
"Right Click Save As" |
|
| |
|
|
| |
----------------------------------------------------------------------------------------------------------------- |
|
| |
|
|
| |
|
|
| |
10 Easy Steps
For Proper Surface-Mount Twin Post Lift Operation |
|
| |
1.
Lifts are only to be used by a trained operator who has read and
is familiar with A.L.I. Literature: ANSI ALOIM current standard,
Lifting it right, Vehicle lifting points
2.
Inspect your lift daily / perform maintenance as advised by
manufacturer. Make sure your lift has been inspected by a third
party
at least annually
3.
Inspect bay for debris, oil on floor, obstructions etc..
4.
Check capacity of vehicle and be sure it does not exceed the
lifts maximum capacity (check trunk, box bed for cargo that is
unexpected
and will offset vehicles center of gravity. REMOVE LOAD
before lifting
5.
Look up the manufacturers suggested lifting points in current
quick reference guide for frame engaging lifts
6.
Position lifting arm pads under the vehicles lifting points and
lift hoist. Stop just before it makes contact with the vehicle
(Check pad placement)
7.
Once pads are lined up with vehicle lifting points raise vehicle
so wheels are 1' off the ground.Slightly shake vehicle in front
and
rear. Observe pad placement.
8. If
vehicle and or pads do not move you are now ready to lift the
vehicle to desired working height. Remember to always:
(LOWER LIFT TO LOCKING LATCHES)
9. If
you are going to remove a large / heavy component always use 4
appropriately rated jack stands with lift.
| 10.
|
When you are ready to lower
the lift make sure there are no tools / equipment or
people left under the vehicle. Raise the lift slightly
|
| |
disengage the locking latches
and depress the release valve. Always (OBSERVE BOTH
SIDES OF LIFT TO ENSURE BOTH .LOCKING
LATCHES ARE DISENGAGED AND THAT THE TWO SIDES DESCEND
EQUALLY) |
This list is generic for conveying safety procedures and
practices for the use of 2 post frame engaging lifts. This list
is designed to improve
operator awarness and safety. Refer to manufactures lifting
practices and maintenance.
A free service provided by
Precision Hydraulics LTD. |
|
| |
|
|
| |
Download Printable File
"Right Click Save As" |
|
| |
|
|
| |
----------------------------------------------------------------------------------------------------------------- |
|
| |
|
|
| |
|
|
| |
10 Easy Steps
For Surface-Mount Platform Lift Operation |
|
| |
1. Lifts are only to be used by a trained operator who has read
and is familiar with ALI Literature: ANSI ALOIM current
standard, Lifting it
| |
right, Vehicle lifting points |
2. Inspect
your lift daily / perform maintenance as advised by
manufacturer. Make sure your lift has been inspected by a third
party at least
annually
3. Inspect bay for debris, oil on runways obstructions etc..
| 4. |
Check capacity of vehicle and
be sure it does not exceed the lifts maximum capacity
(check trunk, box, and/or bed for cargo that is
unexpected and will offset vehicles center of gravity.
REMOVE LOAD before lifting |
| |
|
| 5 |
Get a co-worker to guide the
driver up the ramps and on to the lift (the guide must
stand off to the side of the vehicle NEVER directly in
front. |
| |
|
| 6. |
Lift the vehicle slightly and observe |
| |
|
| 7. |
If everything looks ok raise
lift to desired working height. Remember to always:
(LOWER LIFT TO LOCKING LATCHES) |
| |
|
| 8. |
If you are going to remove a large / heavy component always
use 4 appropriately rated jack stands with lift. |
| |
|
| 9. |
When using rolling jacks always refer to the vehicles
manufacturers suggested lifting points |
| |
|
| 10. |
When you are ready to lower the lift make sure there are no
tools / equipment or people left under the vehicle. Lower all
rolling jacks. Raise
the lift slightly disengage the locking latches and depress the
release valve. Always (WATCH ALL FOUR CORNERS TO BE SURE ALL
LOCKS ARE RELEASED
AND ALL FOUR CORNERS ARE DESCENDING) |
| |
|
| |
This list is generic for conveying safety procedures and
practices for the use of 4 post lifts, Parallelogram lifts and
Scissor lifts. This list is
designed to improve operator awareness and safety. Refer to
manufactures lifting practices and maintenance.
A free service provided by
Precision Hydraulics LTD. |
| |
|
| |
Download Printable File
"Right Click Save As" |
|
|
| |
|
|
